Tag: PLM
-
How to create the Release workflow?
How to create the Release workflow? The Release Workflow can be created from the Part Profile Card. You can then generate the "Precondition Report" that checks the following pre-requirements: If all them are fulfilled, you can launch the Workflow that will make the lifecycle state of the Part evolving to Released. Complete documentation: Release Workflow
-
What is the concept of the Release workflow?
What is the concept of the Release workflow? The Release workflow is used to declare that a given Part (and its BOM) is allowed to be used for its intended purpose, meaning that the required item function has been validated. A Part should be Released when the first asset created from this design is accepted.
-
How to search and visualise files of SmarTeam CAD Documents in the PLM Platform?
How to search and visualise files of SmarTeam CAD Documents in the PLM Platform? To locate, view or open files of SmarTeam(ST) CAD Documents through the PLM platform, follow the subsequent steps. 1. Optional prerequisite to enable the opening of STEP files of ST CAD Document directly into SpinFire Ultimate: Install the software below from
-
How to delete an object from PLM Platform?
How to delete an object from PLM Platform? In order to be able to delete an object from the PLM platform (whether it is a Part, a CAD document, a non-CAD document or a Folder), there are a number of requirements that must be met. All these requirements and the necessary steps are explained in
-
How to create the Fast-Track Promotion Workflow?
How to create the Fast-Track Promotion Workflow? The Fast-Track Promotion Workflow can be created from the Part Profile Card. You can then generate the "Precondition Report" that checks the following pre-requirements: If all them are fulfilled, you can launch the Workflow. Complete documentation: Fast-Track Promotion Workflow FAQ
-
What is the concept of the Fast-Track Promotion Workflow?
What is the concept of the Fast-Track Promotion Workflow? The Fast-Track Promotion can be used to approve the Part without going through a Design Verification, in case the Master CAD Documents are in Approved/Released state. Once the Part is Approved/Released, you may have the need to just attach to the Part additional documentation, without modifying
-
How to validate a Drawing in the PLM Platform ?
How to validate a Drawing in the PLM Platform ? It is not possible to validate a single CAD Document in the PLM platform. The Design Verification Workflow acts on the Part and collects all the CAD Documents and Documents attached to the Part, plus its BOM. Complete documentation: Design Verification Workflow FAQ
-
How to replace an Object (CAD Document/Document/Part) with another one ?
How to replace an Object (CAD Document/Document/Part) with another one ? The "Replace By" command can be accessed directly from the profile cards of the following object types: The command is accessible from the "More" menu . Please note that the name of this command adapts according to the object from which this command is
-
What are the prerequisites to perform an Assign Drawing(s) Label Workflow ?
What are the prerequisites to perform an Assign Drawing(s) Label Workflow ? There are few basic pre-requirements that must be fulfilled for being able to perform an Assign Drawing(s) Label Workflow. CAD Documents set as Root Objects must: – Be of type "Drawing". – Be in "Approved" or "Released" lifecycle state. – Have a Design
-
How to create and launch the Assign Drawing(s) Label Workflow ?
How to create and launch the Assign Drawing(s) Label Workflow ? The Assign Drawing(s) Label Workflow can be created from CAD Documents of type Drawing: Once the Change Item profile card appears, fill in its Description and choose the Drawing Label you need to apply: You can change the Label of multiple Drawings with the